The Warp Five
Wall Mounted Spinning Signs
The Warpfive wall-mounted and pole-mounted rotating signs... |
 |
Why spinning signs are superior to the swing sign:
- Greatly improved visibility - spins in the
wind
- Good durability
- Installed out of vandal reach
- Increased sales
- Strong branding
- Cost effective exposure
The Warpfive Wall or Pole Mounted Windvane is an extension of
our highly successful Warpfive Rotating Windvane. This sign has
all the benefits of the pavement rotating sign namely the greatly improved
visibility as it rotates and displays the brand or message prominently.
Available in three different sizes, this product caters for shop fronts and buildings who wish to grab attention away from their competitors with unique and attractive rotating signage. |
The Windvane Design
- Aerodynamically designed to rotate at exceptionally low wind speeds
and maintain low revolutions at high wind speeds.
- Manufactured to European quality standards.
- All corners are radiused to provide an aesthetically pleasing product
and to avoid injury or damage to property.
The
rotating section is of composite construction with injection molded ABS
trim. This provides an exceptionally strong, light product, which has
an extended lifespan and is rust free. All brackets are manufactured
from steel which is powder-coated for rust protection and protection against harmful UV rays.
500mm Wall or pole mounted Rotating Sign
 |
 |
 |
Dimensions:
Overall size:
592mm(height) x
515mm(width)
Rotating Section:
500mm(height) x 515mm(width) x 80mm(depth)
Bracket: 415mm (length) |
Red |
Blue |
White |
On volumes of 300 units and more, we are able to
customise to any Pantone colour. |
Trade prices available on request.
Non trade enquiries welcome,
please contact us for direction to a local reseller.
Click here for order information
|
Small, attractive and cost effective, this unit is easy to brand and install. Just apply vinyl to the ABS shell as per the vinyl application guide found lower on this page and you're ready to install.
This unit comes with two mounting options: the wall mount option and a pole mount bracket. The pole mount bracket includes a unique tensioning device which enables you install the unit quickly, easily with the perfect ammount of tension required to keep the unit stable.
|
 |
1000mm Wall mounted Rotating Sign
Bracket available in white only
Trim available in red, white and blue
On volumes of 300 units and more, we are able to
customise to any Pantone colour. |
Dimensions:
Overall size:
1242mm(height) x
515mm(width)
Rotating Section:
1000mm(height) x 515mm(width) x 80mm(depth)
Bracket: 1242mm (length) |
Click here for order information
|
This unit comprises of a one metre high rotating unit and a structurally secure bracket which attaches to both the top and bottom of the rotating section. Multiple bearings and a continuous central aluminium shaft are used for smooth operation and good longevity.
Graphics are printed or applied to ABS.
|
 |
2000mm Wall mounted Rotating Sign
Bracket available in white only
Trim available in red, white and blue
On volumes of 300 units and more, we are able to
customise to any Pantone colour. |
Dimensions:
Overall size:
2218mm(height) x
515mm(width)
Rotating Section:
2000mm(height) x 515mm(width) x 80mm(depth)
Bracket: 2218mm (length) |
|
Click here for order information |
This highly visible large format rotating sign comprises of a two metre rotating section mounted on a bracket system made from structural steel. A central aluminium shaft, specially extruded aluminium side strips and an aluminium outer shell makes for an extremely strong unit able to withstand most high wind conditions.
Six factory lubricated bearings are used to ensure smooth operation and an additional braking system can be purchased to reduced the spinning speed or stop the unit during storms and gales.
|
 |
Windvane Printing and Finishing
Signage companies and resellers normally apply computer cut or digitally
printed vinyl directly to the substrate. For larger volumes Warpfive can
provide finished units, with the graphics silk-screened directly onto
the substrate.
Vinyl Application Guide:
Step 1
Blank Windvane's are supplied assembled with colour coded side
strips and top and bottom capping strips.
Start by dissasembling the windvane by removing the 6 screws which
hold the trim in place |
 |
Step 2
Apply your vinyl to the blank windvane. It is a good idea to use
a larger piece of vinyl than the size of the windvane which will
allow you to position the vinyl more easily and then trim off the excess. |
 |
Step 3
Re-attach the side strips and capping strips by placing them back
in place and fixing with the screws provided. |
 |
Congratulations!
You have sucessfully applied artwork to your new Windvane! |
|
Dimensions and specifications:
| Technical
Information |
| Longevity |
1 to 5 years |
| Mass of rotating section |
1.8kg (500mm), 2.0kg(1000mm), 7kg(2000mm) |
| Dimensions: Rotating section, 500mm Sign |
500mm(height) x 515mm(width) x 80mm(depth) |
| Dimensions: Rotating section, 1000mm Sign |
1000mm(height) x 515mm(width) x 80mm(depth) |
| Dimensions: Rotating section, 2000mm Sign |
2000mm(height) x 515mm(width) x 80mm(depth) |
| Maintenance |
None - bearings factory lubricated |
| Environmental |
| Max. Wind Speed |
Wind tunnel tested to 34mph/60km/h |
| Temperature range |
-25° C to 40° C |
| UV Protection |
All plastics / coatings UV inhibited |
| Rust Protection |
All steelwork Electro-galvanised / Powder coated |
| Production
Specifications |
| Method of printing |
Silkscreen / Digital |
|
